Ancient Greece: The Beginnings of Outdoor Statue Design

Sculptors garnished the elaborate columns and archways with renderings of the gods until the time came to a close and more Greeks had begun to think of their religion as superstitious rather than sacred; at that time, it grew to be more accepted for sculptors be paid to show everyday people as well. Portraiture came to be widespread as well, and would be embraced by the Romans when they conquered the Greeks, and on occasion affluent households would order a representation of their progenitors to be positioned inside their huge familial burial tombs. A point of aesthetic development, the use of sculpture and alternate art forms morphed during the Greek Classical period, so it is inaccurate to suggest that the arts provided only one function. It may be the advanced quality of Greek sculpture that captivates our eye today; it was on a leading-edge practice of the classic world whether it was established for religious reasons or aesthetic pleasure.

Self-Contained Water Elements: Are They Useful?

Since self-contained fountains are both low-cost and easy to install, they are very trendy. Since all pieces are included with the fountain, no other parts are required. Fountains that have their own water source are also known as “self-contained”.

If you are looking for an easy-to-install water fountain for a patio or deck, a self-contained model is definitely for you. Their mobility is also a plus, as they are very easy to move around.

The landscaper will first inspect that the place where you want your fountain to go is level. Any bumps can easily be leveled by your landscaper. Your water feature is now prepared for placement and the addition of water. The final thing remaining to do is to connect it to a power source such as batteries, a wall socket, or a solar panel, and it will be operational.

Anyone who does not have easy access to a water source or external plumbing should look into a self-contained fountain. The center of a garden is a popular spot for a water fountain so as to get the most visibility, even though they can be put anywhere. Cast stone, metal, ceramic, and fiberglass are just some of the materials used to make them.

Outdoor Elegance: Wall fountains

Nowadays you can just place your garden water fountain close to a wall since they no longer need to be hooked to a pond. In addition, it is no longer necessary to excavate, deal with a difficult installation process or tidy up the pond. Due to its self-contained nature, this feature no longer needs plumbing work. Frequently adding water is the only requirement. Remove the water from the basin and place clean water in its place when you see that the area is grimy.

Any number of materials can be utilized to build garden wall features, but stone and metal are the most convenient. or_132_artshot__52796.jpg You must know the style you are shooting for in order to select the best material. It is important to buy hand-crafted, light garden wall features which are also simple to hang. The fountain you buy must be simple to maintain as well. While there may be some cases in which the setup needs a bit more care, generally the majority require a minimal amount of effort to install since the only two parts which call for scrutiny are the re-circulating pump and the hanging equipment. You can effortlessly liven up your garden with these kinds of fountains.

The Best Way to Install a Wall Water Feature

Make any room much better with a wall fountain. A waterfall will bring a feeling of relaxation with the comforting sounds of moving water. While any space will benefit from a wall fountain, they are most often hung in foyers. How to mount one varies somewhat depending on the model, but there are some general guidelines that apply to all of them. Note that different components will need to be put together during assembly. The foundation and the upper portion will need to be put together as well as the pump and the tubing.

Do not forget to review the directions before getting started in order to avert problems. You will find the process relatively easy. That said, there can be small differences depending on what design you have. Another person can be useful to hold the wall fountain in the appropriate place so that you can mark the wall. The best way to make sure it is mounted correctly is to use a level. Put your marks at both the top and the bottom. Your wall fountain can be installed using one of two methods. You can insert the screws in the wall and glide them into the slots on the back of the wall fountain. Alternatively, brackets can be fixed to the wall. This last one is the more advisable way, specifically if your fountain is large. Determine where the brackets will be and then mark the appropriate spot on the wall. Utilize a drill to make the pilot holes on the wall for the drywall anchors. Place the anchors in the wall with a hammer. Hold the brackets in position on the wall and use a portable drill or screwdriver to affix them.

At this point, lift your unit and hang it on the mounting brackets. Make sure that it is properly aligned and not loose. Water can be added after the fountain has been secured. The pump should be fully submerged under water. Plug the pump into the wall and see the water begin to circulate. Slowly add more water until it comes within an inch of the top of the basin. Be aware that it will overflow when not pumping if you fill it to the top edge. The water level will rise because all of the flowing water will settle down at the bottom part of the basin. Harm can be caused if the water is overly full and spills down your wall.

The Original Fountain Creative Designers

Multi-talented individuals, fountain artists from the 16th to the late 18th century typically served as architects, sculptors, artists, engineers and cultivated scholars all in one person. Throughout the Renaissance, Leonardo da Vinci exemplified the creator as a creative master, creator and scientific virtuoso. The forces of nature inspired him to explore the properties and movement of water, and due to his curiosity, he methodically documented his ideas in his now famed notebooks. Combining imaginativeness with hydraulic and gardening talent, early Italian water fountain designers modified private villa settings into innovative water displays complete with emblematic meaning and natural charm. The brilliance in Tivoli were developed by the humanist Pirro Ligorio, who was widely known for his capabilities in archeology, engineering and garden design. For the various estates near Florence, other fountain developers were well versed in humanistic themes as well as classical technical texts, masterminding the incredible water marbles, water highlights and water jokes.


The Minoan Culture: Outdoor Fountains
Fountains and Water and the Minoan Civilization They were used for water supply as well as removal of storm water and wastewater. They were for the most part constructed from... read more
The Plusses of Having Stand-Alone Water Elements
If you need a fountain that will not require an outside water source or additional plumbing, a self-contained fountain is best. Lots of people put them in the center of the garden, but they can really go anywhere. Cast stone, metal,... read more
A Genuine Roman Masterpiece: The Santa Maria Fountain in Cosmedin
Amazing finds of both Christian and pagan roots have been made by archaeologists and restorers in the area around Santa Maria in Cosmedin in Rome. The celebrated marble sculpture called the Bocca... read more