Where did Garden Water Fountains Come From?

The incredible construction of a fountain allows it to provide clean water or shoot water high into air for dramatic effect and it can also serve as an excellent design feature to enhance your home.

Originally, fountains only served a practical purpose. Water fountains were linked to a spring or aqueduct to provide potable water as well as bathing water for cities, townships and villages. twf024-ra__29355.jpg Until the late nineteenth, century most water fountains functioned using the force of gravity to allow water to flow or jet into the air, therefore, they needed a supply of water such as a reservoir or aqueduct located higher than the fountain. Artists thought of fountains as wonderful additions to a living space, however, the fountains also served to provide clean water and celebrate the designer responsible for creating it. Animals or heroes made of bronze or stone masks were often used by Romans to decorate their fountains. During the Middle Ages, Muslim and Moorish garden designers included fountains in their designs to re-create the gardens of paradise. King Louis XIV of France wanted to illustrate his superiority over nature by including fountains in the Gardens of Versailles. Seventeen and 18 century Popes sought to extol their positions by including decorative baroque-style fountains at the point where restored Roman aqueducts arrived into the city.

The end of the 19th century saw the increase in usage of indoor plumbing to provide drinking water, so urban fountains were relegated to strictly decorative elements. Fountains using mechanical pumps instead of gravity allowed fountains to bring recycled water into living spaces as well as create unique water effects.

Beautifying city parks, honoring people or events and entertaining, are some of the uses of modern-day fountains.

Tips for Hanging a Wall Fountain

Any space will benefit from the inclusion of a wall fountain. The benefits of the water sounds include providing peace and calm to the room. People tend to hang wall fountains in any area where folks gather, but most commonly in entryways. Although each model might have slight differences on how to mount it, the standard instructions are the same for all. Bear in mind that different components will need to be put together during assembly. Once you connect the base and the top you will then need to connect the pump and the tubing. Be sure to review the directions before starting to ensure it is done right. You should find the steps relatively easy. Keep in mind, though, that each style might require a slight change. Another person can be helpful to hold the wall fountain in the correct spot so that you can mark the wall. To guarantee it will be straight, use a level. It is recommended to mark both the bottom and the top placements. Wall features can be mounted in more than just one way.

You will find holes on the back side of the wall fountain which can be hung directly onto the screws. A second option is use brackets secured on the wall. This last one is the more advisable way, particularly if your fountain is large. Determine where the brackets will go and then mark the precise location on the wall. Put pilot holes in the wall for the drywall anchors. Carefully hammer the anchors into the wall. The brackets can then be mounted on the wall with a screwdriver or wireless drill. At this point, pick up your unit and fit it on the mounting brackets. Check to see that it is in the proper position and safely on the brackets. Water can be added after the fountain has been mounted. Make sure there is enough water to cover the pump. Plug the pump into the wall and observe the water begin to circulate. Very carefully add just enough water to reach one inch below the top edge of the basin.

Never fill the basin all the way to the top or it will overflow anytime the pump is not on. The water level will rise because all of the moving water will settle down at the base of the basin. When the fountain is too full, water can spill out and cause damage to the surrounding area.

Anglo Saxon Grounds at the Time of the Norman Conquest

The Anglo-Saxon way of life was considerably changed by the introduction of the Normans in the later eleventh century. The Normans were better than the Anglo-Saxons at architecture and horticulture when they came into power. But nevertheless home life, household architecture, and decoration were out of the question until the Normans taken over the rest of the populace. Because of this, castles were cruder structures than monasteries: Monasteries were usually significant stone buildings set in the biggest and most fecund valleys, while castles were built on windy crests where their residents dedicated time and space to projects for offense and defense. The serene practice of gardening was unlikely in these dreary bastions. The best example of the early Anglo-Norman style of architecture existent in modern times is Berkeley Castle. The keep is thought to date from the time of William the Conqueror. An enormous terrace encompasses the building, serving as an obstruction to attackers trying to excavate under the castle walls. A scenic bowling green, enveloped in grass and bordered by battlements cut out of an ancient yew hedge, forms one of the terraces.

Suggestions for Picking the Ideal Water Element for Your Needs

When you are selecting a water fountain, be sure to give some thought to where you will put it. Roundabouts and entryways are wonderful spots for them.

If you prefer to put yours against a wall, there are fountains designed specifically for this purpose. They can be secured against a wall, post, or fence by using a bar or a hook fastened to the back. Bare in mind when you install your fountain that you must securely fasten it to a wall to avoid having it fall over in high winds and being damaged.

In communal places like parks where folks tend to sit and relax for a few minutes, you will notice one other option – the garden sculpture style.

Backyard Water Fountains: The Numerous Designs From Which to Choose

A garden can be a small sanctuary, providing you a tranquil place to stop and enjoy some outdoor time. Even though there is a lot of work involved in getting a new one designed and made, it is worth the effort for anyone who will be using it. Both the “curb appeal” and the value of your property will be driven up when you install an eye-catching garden. There are many ways to enhance the visual appeal of a yard, like adding flowers and plants, artwork, an attractive pavement, or a water feature.

A water fountain can make a considerable difference to the beauty and tranquility of your garden.

It will change a plain area into a breathtaking place of peaceful tranquility. The trickling water of your fountain will not only give you a calming oasis, it will also attract wild birds and other friendly local animals. The rest of the garden will immediately become just background to the beautiful new fountain.


From Where Did Fountains Begin?
Beautifying city parks, honoring people or events and entertaining, are some of the functions of modern-day fountains. read more
The Profound Effects of Fountains
If you want to make your porch, patio, or back yard even more delightful, think about getting an outdoor garden fountain. Even if you are already happy with your outdoor area, the... read more