How to Choose the Best Place for Your Fountain

When you are deciding on a water fountain, make sure you give some thought to where you will put it. The entryway to a hotel or building is a wonderful spot for them, as they offer a lovely welcome to guests.

There are models such as wall fountains made especially to be hung against a flat surface. a-579__96911.jpg If you check the back, you will notice a bar or some other piece to secure it against a wall, grate or fence. Such fountains are unstable on their own, therefore, be certain to affix it right away so that it does not fall over as a result of weather conditions, animals or other natural occurrences.

A popular spot to add a garden sculpture is traditionally in areas where people gather to relax and enjoy the scenery.

A Few Good Techniques to Mount a Wall Water Feature

Wall elements can enhance any space. The relaxing sound of the waterfall will de-stress and sooth. People tend to hang wall fountains in any room where folks meet, but most commonly in entryways. How to install one varies somewhat depending on the model, but there are some general guidelines that apply to all of them. Be sure that all the various components are used in building it. You should first attach the foundation to the upper portion, then connect the pump and the tubing. Be sure to review the instruction manual before starting to make sure it is done correctly. You will find the procedure relatively straightforward. Note, however, that the instructions for your individual model can vary slightly. Another person can be helpful to hold the wall fountain in the appropriate place so that you can mark the wall. To ensure a proper line, use a level. Mark the spot where you want the very top of the wall fountain as well as the base. There is more than one method to install a wall fountain. The first is to utilize screws which you slide into the holes on the back. Alternatively, you could attach brackets to the wall and use those. The second option is best, particularly for larger wall fountains. Mark the spot on the wall where the brackets need to be attached. To insert the drywall anchors, first off drill pilot holes into the wall. Affix the anchors by correctly hammering them into the wall.

The brackets can then be mounted on the wall using a screwdriver or cordless drill. Mount your wall fountain by hanging it onto the brackets. Ensure that it is firmly mounted and level. If the alignment is right, it’s time to add water. Make certain there is sufficient water to cover the pump. It is now time to plug it in and watch the water trickle. The water should fill the basin to within an inch of the top. Note that it will overflow when not pumping if you fill it to the top. The water level will rise because it all settles at the bottom of the basin when not getting pumped. The water will overflow and cause damage if the wall fountain is overly full.

Did You Know How Mechanical Designs And Styles of Water Fountains Became Known?

Spreading useful hydraulic information and water fountain design ideas all through Europe was accomplished with the written documents and illustrated publications of the time. A globally celebrated pioneer in hydraulics in the later part of the 1500's was a French fountain designer, whose name has been lost to history. By creating landscapes and grottoes with integrated and amazing water attributes, he started off his career in Italy by earning Royal mandates in Brussels, London and Germany. The book, “The Principles of Moving Forces,” penned near the end of his lifetime in France, became the fundamental writing on hydraulic mechanics and engineering. Updating principal hydraulic advancements of classical antiquity, the book also explains contemporary hydraulic technologies.

As a mechanical means to push water, Archimedes made the water screw, fundamental among key hydraulic advancements. Natural light heated the liquid in a pair of hidden containers next to the ornamental fountain were shown in an illustration. The end result: the fountain is stimulated by the hot liquid expanding and rising up the piping. Concepts for pumps, water wheels, water features and outdoor ponds are also covered in the guide.

Rome’s Early Water Transport Systems

Aqua Anio Vetus, the first raised aqueduct founded in Rome, started off supplying the men and women living in the hills with water in 273 BC, though they had depended on natural springs up until then. During this period, there were only two other techniques capable of supplying water to higher areas, subterranean wells and cisterns, which amassed rainwater. Beginning in the sixteenth century, a unique approach was introduced, using Acqua Vergine’s subterranean sectors to provide water to Pincian Hill. Pozzi, or manholes, were made at standard intervals along the aqueduct’s channel. While these manholes were created to make it less difficult to sustain the aqueduct, it was also possible to use buckets to remove water from the channel, which was carried out by Cardinal Marcello Crescenzi from the time he acquired the property in 1543 to his passing in 1552. He didn’t get sufficient water from the cistern that he had built on his residential property to obtain rainwater. To give himself with a much more effective system to gather water, he had one of the manholes opened, providing him access to the aqueduct below his residence.

Modern Garden Decoration: Outdoor Fountains and their Roots

A fountain, an incredible piece of engineering, not only supplies drinking water as it pours into a basin, it can also propel water high into the air for a noteworthy effect.

Pure functionality was the original role of fountains.

Cities, towns and villages made use of nearby aqueducts or springs to supply them with drinking water as well as water where they could bathe or wash. Up to the late nineteenth century, water fountains had to be near an aqueduct or reservoir and higher than the fountain so that gravity could make the water flow downwards or jet high into the air. Fountains were not only utilized as a water source for drinking water, but also to decorate homes and celebrate the designer who created it. Animals or heroes made of bronze or stone masks were often times utilized by Romans to decorate their fountains. During the Middle Ages, Muslim and Moorish garden designers included fountains in their designs to mimic the gardens of paradise. King Louis XIV of France wanted to illustrate his superiority over nature by including fountains in the Gardens of Versailles. The Popes of the 17th and 18th centuries were glorified with baroque style fountains made to mark the arrival points of Roman aqueducts.

Indoor plumbing became the key source of water by the end of the 19th century thereby limiting urban fountains to mere decorative elements. Gravity was replaced by mechanical pumps in order to permit fountains to bring in clean water and allow for amazing water displays.

These days, fountains decorate public spaces and are used to recognize individuals or events and fill recreational and entertainment needs.


The Original Fountain Designers
Often serving as architects, sculptors, artists, engineers and cultivated scholars all in one, from the 16th to the later part of the 18th century, fountain designers were multi-talented people, Exemplifying the Renaissance artist as a imaginative... read more
Builders of the First Water Features
Water fountain designers were multi-talented people from the 16th to the late 18th century, often serving as architects, sculptors, artisans, engineers and highly educated scholars all in one person. During the... read more
Water Transport Solutions in Ancient Rome
Prior to 273, when the first elevated aqueduct, Aqua Anio Vetus, was established in Roma, citizens who dwelled on hills had to journey even further down to collect their water from natural sources. ... read more
Agrippa’s Splendid Water-lifting Appliance
Regrettably, Agrippa’s wonderful plan for lifting water wasn’t cited much following 1588, when Andrea Bacci acclaimed it in public. It... read more
A Short History of Garden Fountains
Towns and villages relied on working water fountains to funnel water for preparing food, washing, and cleaning up from local sources like ponds, channels, or springs. ... read more
The First Public Water Fountains
The water from rivers and other sources was initially supplied to the residents of nearby towns and cities by way of water fountains, whose purpose was largely practical, not aesthetic. A source of water higher in elevation than the fountain was required to pressurize... read more